OUR SALE HAS BEEN EXTENDED, GET 15% OFF ALL PRODUCTS AT THE CHECKOUT

Visofold 1000 Tectura FD
Material

Aluminium

Glass specification

TECT 1 / TECT 2

U Values

TECT 1 - 1.8 / DER C TECT 2 - 1.5

Suitable for above ground

Yes - Standard threshold only

PAS 24/ Secure By Design/ DOC Q compatible

Yes - Please contact the office

Cill

85MM / 150MM / 190MM / 225MM

Lead times

Minimum 4-6 weeks

Downloads

Aluminium French Door (TecTURA Visofold 1000)

With a luxury aluminium profile offering traditional styling with a modern touch, our French Doors bring the perfect balance of privacy and connection between the inside and outside. They are especially great for areas where space is at a premium, to ensure you get the most from your view, designed with your bifold in mind.

With a luxury aluminium profile offering traditional styling with a modern touch, our French Doors bring the perfect balance of privacy and connection between the inside and outside. They are especially great for areas where space is at a premium, to ensure you get the most from your view, designed with your bifold in mind.

Choose Options

Scheme

Width (1500mm - 2500mm)
Width

Measuring doors & windows is simple but please follow our easy instructions:

  • For bifold & sliding doors to work as smoothly as designed, it is imperative that the outer frame is fitted level and square. To ensure this, you must measure the brickwork aperture as shown below.

  • Three measurements of width and height should be taken and the squareness of the aperture determined by, for example, taking diagonal measurements (see image below). The smallest measurement of width and of height minus a fitting tolerance (usually 10mm) is used to determine manufacturing sizes.

Please also take into account the height of the door’s threshold, that you step over. This is critical for the following reasons:

  • On open-out folding doors with a standard threshold, it allows the possibility of aligning your internal floor with the top of the threshold, to reduce the step over height.

  • On open-out folding doors with an aluminium low threshold, it ensures a level transition from outside to inside, or between internal rooms.

  • On open-in doors it ensures that the opening door sashes do not foul your internal floor.

mm
Height (1820mm - 2550mm)
Height

Measuring doors & windows is simple but please follow our easy instructions:

  • For bifold & sliding doors to work as smoothly as designed, it is imperative that the outer frame is fitted level and square. To ensure this, you must measure the brickwork aperture as shown below.

  • Three measurements of width and height should be taken and the squareness of the aperture determined by, for example, taking diagonal measurements (see image below). The smallest measurement of width and of height minus a fitting tolerance (usually 10mm) is used to determine manufacturing sizes.

Please also take into account the height of the door’s threshold, that you step over. This is critical for the following reasons:

  • On open-out folding doors with a standard threshold, it allows the possibility of aligning your internal floor with the top of the threshold, to reduce the step over height.

  • On open-out folding doors with an aluminium low threshold, it ensures a level transition from outside to inside, or between internal rooms.

  • On open-in doors it ensures that the opening door sashes do not foul your internal floor.

mm
Scheme
Left Main
--
Right Main
--
Opening Direction
Open In
+£0.00
Open Out
+£0.00

Style

Colour ** When ordering Bespoke RAL or Dual RAL, the total cost of all special colour options must exceed £2500 inc. VAT **
Colour

When ordering Bespoke RAL or Dual RAL, the total cost of all special colour options must exceed £2500 inc. VAT

To view in full size click here

White RAL 9010
+£0.00
Dark Grey RAL 7016
+£0.00
Black RAL 9005
+£0.00
Grey (Outside) / White (Inside)
+£0.00
Black (Outside) / White (Inside)
+£0.00
Bespoke RAL
+£450.00
Dual RAL
+£550.00
Finish
Gloss
+£0.00
Matt
+£0.00
Satin
+£0.00
Matt (Outside) / Gloss (Inside)
+£0.00
Dual RAL - finish as above
+£0.00
Threshold
Threshold

To review and/or print please click link: Open In rebated threshold (with cill)

To review and/or print please click link: Open Out rebated threshold (with cill)

To review and/or print please click here: Open Out 15mm low threshold (no cill)

To review and/or print please click here: Open Out 15mm low threshold (with cill)

To review and/or print please click link: Open Out 20mm threshold (no cill)

To review and/or print please click link: Open Out 20mm threshold (with cill)

TecTURA Aluminium Bi-Fold Door Cills

  • Our standard aluminium cills are available in four sizes 85mm, 150mm, 190mm and 225mm. The standard size for a normal brickwork aperture is 150mm, which provides a 50mm ( 2′ ) overhang, when the back of the door frame is fitted in line with the back edge of the outside brickwork. The 85mm cill, sometimes referred to as a stub cill, is used when the door frame is fitted forward in the brickwork reveal and likewise the 190mm cill is used when the door is fitted further back in the reveal. You may be required to sit the cill 30mm back over the cavity to conform to Part L of the building regulations, in this case a minimum of a 190mm cill would be required.

Standard Threshold
+£0.00
15mm Low Threshold
+£0.00
20mm Low Threshold
+£0.00
15mm Low Threshold + Ramp Threshold
+£35.00
20mm Low Threshold + Ramp Threshold
+£35.00
Cill
Cill

The industry standard is 150mm. A stub cill may be required if you have a small reveal or are sitting your door forward in the reveal and want to minimize the projection of the cill. You may choose an 190mm cill if the door is sitting back in the reveal and you need to bridge the brickwork at the base of the door.

The 190mm and 225mm cills have to be selected on triple track sliding patio door systems, due to the width of the bottom frame.

None
+£0.00
85mm Cill
+£0.00
150mm Cill
+£0.00
190mm Cill
+£0.00

Glass

Glass Specification
Glass Specification
Low E Coating Soft
Spacer Bar Energy
Internal Glass Soft
Cavity Gas Argon
Solar Reflect 38%
Glass ‘U’ Value 1.1 u
Total ‘U’ Value 1.8 u
Door Energy Rating C
Low E Coating Soft
Spacer Bar Energy
Internal Glass Solar
Cavity Gas Argon
Solar Reflect 49%
Glass ‘U’ Value 1.0 u
Total ‘U’ Value 1.5 u
Unglazed
-£200.00
Tect 1
+£0.00
Tect 2
+£30.00
Glass Design
None
+£0.00
Square Leaded
+£0.00
Diamond Leaded
+£0.00
White 18mm Georgian Bar
+£0.00
Brown 18mm Georgian Bar
+£0.00
Acorn 18mm Georgian Bar
+£0.00
White 25mm Georgian Bar
+£0.00
Brown 25mm Georgian Bar
+£0.00
Acorn 25mm Georgian Bar
+£0.00
Self Cleaning Glass
Yes
+£165.00
No
+£0.00
Integral Blinds - Type
None
+£0.00
Manual Cord
+£0.00
Magnetic Slider
+£0.00
Integral Blinds - Colour
None
+£0.00
White
+£550.00
Pale Silver
+£550.00
Cream
+£550.00
Light Grey
+£550.00
Yellow
+£550.00
Fawn
+£550.00
Light Green
+£550.00
Light Blue
+£550.00
Dark Grey
+£550.00
Metallic Silver
+£550.00

Handles & Other

Handle Choice
Handle Both Sides
+£0.00
Internal Handle Only
+£0.00
Handle Colour
Black
+£0.00
White
+£0.00
Grey
+£0.00
Bright Chrome
+£25.00
Brushed Steel
+£25.00
Chrome (Outside) & White (Inside)
+£25.00
Gold (Outside) & White (Inside)
+£25.00
Black (Outside) & White (Inside)
+£25.00
Trickle Vent
Yes
+£15.00
No
+£0.00
Choose Options

Chosen options

Ask a question
Enter your details to view your quote
Get your quote
Discount applied at checkout

Frequently Asked Questions

2250mm

1900mm

Solatherm can be triple glazed, Tectura only double glazed

Tectura has low threshold options

Solatherm allows for panoramic views with lower 94mm sightline

Tectura – DER Band C or 1.5W/m²K Overall performance

Solatherm – DER Band A, 1.2W/m²K Overall performance

Can we help you further?

Still looking for product advise or spec information, please see our FAQs

Full FAQ listings
FAQs callout

Supplying unbeatable doors and windows for domestic builds

Get in touch today to find out more

Not ready yet? Just checking out your options?

We get it, it's a big decision and you're right to do your homework!
Leave your email address below and we will honour any sale or promotion we currently have running for the next 6 weeks.