Aluminium Residential Door (TecTURA Visofold 1000)

To review and/or print please click link: Open In rebated threshold (with cill)

To review and/or print please click link: Open Out rebated threshold (with cill)

To review and/or print please click here: Open Out 15mm low threshold (no cill)

To review and/or print please click here: Open Out 15mm low threshold (with cill)

To review and/or print please click link: Open Out 20mm threshold (no cill)

To review and/or print please click link: Open Out 20mm threshold (with cill)

TecTURA Aluminium Bi-Fold Door Cills

• Our standard aluminium cills are available in four sizes 85mm, 150mm, 190mm and 225mm. The standard size for a normal brickwork aperture is 150mm, which provides a 50mm ( 2′ ) overhang, when the back of the door frame is fitted in line with the back edge of the outside brickwork. The 85mm cill, sometimes referred to as a stub cill, is used when the door frame is fitted forward in the brickwork reveal and likewise the 190mm cill is used when the door is fitted further back in the reveal. You may be required to sit the cill 30mm back over the cavity to conform to Part L of the building regulations, in this case a minimum of a 190mm cill would be required.

• Self-cleaning glass uses a microscopic coating with a unique dual-action. The first stage is ‘photocatalytic’ – the coating reacts with daylight to break down organic dirt.

• The second stage is ‘hydrophilic’ – instead of forming droplets, rainwater hits the glass and spreads evenly, running off in a ‘sheet’ and taking the loosened dirt with it, also drying without leaving streaks

Leaded Glass

• Lead is 9mm wide.
• Choice of Square or Diamond Leaded.
• When ordering square leaded please advise by e- mail your existing square size and preferred grid layout.
• When ordering Diamond Leaded please advise existing diamond size.
• CAD drawings are provided for square leaded glass only, to ensure our layout matches your current design.
• If not advised otherwise we will manufacture to our standard layout.

Georgian Bar

• Choice of 18mm or 25mm bar width.
• Integral between glass.
• Available in White, Brown and Acorn colours.
• When ordering please advise by e- mail your existing square size and preferred grid layout.
• Full CAD drawings are provided after an order has been placed, to ensure our layout matches your current design or preferred choice.
• If not advised otherwise we will manufacture to our standard layout .

The manual cord system is perfect if you are looking for an effortless integral blind system that combines a smart operation with a modern style. With a unique magnetic function that enables you to raise and lower and tilt Venetian blinds that are hermetically sealed in the double glazing unit.

The smart style of the corded integral blind system is accompanied by a black warm edge spacer bar to produce unique appeal, while also delivering outstanding U-Values.

An exceptional product that uses clever magnets, fixed to the external glass by high performance adhesive, allowing for perfect alignment with an internal magnet, by using a cord system the blinds in glass can be raised lowered and tilted. The cord is held under tension with a cord tensioner to comply with the British Blind and Shutter Associationu2018Make it Safeu2019 campaign. This magnet principle does not compromise the unit seal and guarantees the perfect integrity of the double-glazing unit.

Commercial Blinds

• Glass sizes of up to 1m wide are classed as domestic blinds.

• Glass sizes between 1m and 2.8m are classed as commercial blinds. The blind slats are exactly the same as used on the domestic blinds but the drive gear that operates the blind travel and tilting is designed specifically to deal with the additional load.