PVC tilt and turn . UPVC european window. tilt & turn. Liniar t&t window
Material

UPVC

Glass specification

OPTION 3

U Values

1.4

Suitable for above ground floor

Yes

PAS 24/ Secure By Design/ DOC Q compatible

Yes

Cill

85MM / 150MM / 180MM / 225MM

Lead times

Minimum 4 weeks

UPVC Tilt & Turn (Liniar)

uPVC tilt and turn windows are the most cost-effective option and they come with a range of colour amd design options. uPVC tilt and turn window frames are made from a durable plastic and, as such, are renowned for their low maintenance, durability and longevity.

uPVC tilt and turn windows are the most cost-effective option and they come with a range of colour amd design options. uPVC tilt and turn window frames are made from a durable plastic and, as such, are renowned for their low maintenance, durability and longevity.

Choose Options

Measurements

Width (500mm - 3000mm)
Width

Measuring doors & windows is simple but please follow our easy instructions:

  • For bifold & sliding doors to work as smoothly as designed, it is imperative that the outer frame is fitted level and square. To ensure this, you must measure the brickwork aperture as shown below.

  • Three measurements of width and height should be taken and the squareness of the aperture determined by, for example, taking diagonal measurements (see image below). The smallest measurement of width and of height minus a fitting tolerance (usually 10mm) is used to determine manufacturing sizes.

Please also take into account the height of the door’s threshold, that you step over. This is critical for the following reasons:

  • On open-out folding doors with a standard threshold, it allows the possibility of aligning your internal floor with the top of the threshold, to reduce the step over height.

  • On open-out folding doors with an aluminium low threshold, it ensures a level transition from outside to inside, or between internal rooms.

  • On open-in doors it ensures that the opening door sashes do not foul your internal floor.

mm
Height (700mm - 2250mm)
mm
Styles
Styles

The Mullion width (W1 & W2) in the image shown is measured from the side of the frame to the centre of the mullion bar. The industry standard is 600mm. The transom height (H1) is measured from the top of the frame to the centre of the transom bar. The industry standard is 400mm.

Fire Escape Regulations

New Build Property

To conform to building regulations all first floor windows must have a means of fire escape. Bathrooms, toilet and landing windows however are exempt.

This window can be installed on the ground floor without consideration unless it is in a room that does not lead directly into a hallway or does not have a main exit door.

A fire escape window should open without obstruction to at least 0.33 mu² and at least 450 mm high or 450 mm wide. If one of the dimensions is at the 450 mm minimum, then the other dimension will need to be at least 734 mm to achieve 0.33 mu². The bottom of the openable area should be no more than 1100mm above the floor.

Replacement Windows

Current regulations state that you can not downgrade your existing means of escape in the event of a fire. A window with a mullion conforms, subject to the above, and would not downgrade your means of escape.

Style 201
--
Style 202
--
Style 209
--
Style 210
--
Style 211
--
Style 214
--

Product Options

Colour Options
Colour Options

When ordering Bespoke RAL or Dual RAL, the total cost of all special colour options must exceed £2500 inc. VAT

To view in full size click here

White
+£0.00
Grey
+£125.00
Rosewood
+£75.00
Oak
+£75.00
Grey (Outside) & White (Inside)
+£100.00
Oak (Outside) & White (Inside)
+£50.00
Rosewood (Outside) & White (Inside)
+£50.00
Cill Options
None
+£0.00
85mm
+£0.00
150mm
+£0.00
180mm
+£0.00
Trickle Vent
Trickle Vent

PVC Windows

Trickle vents on PVC windows are fitted to each opening sash unless there are more than two where they will be fitted to the first and last sash. Fixed PVC windows are fitted with a 20mm frame extension at the head of the window and the vent is fitted into the frame. These are a PVC vent in either white, tan or rosewood.

Contemporary Aluminium Windows

33mm slim frame

Trickle vents on these windows are fitted to a 42mm frame extension at the head of the window above the first and last sash or centrally if this is one sash. These are an aluminium trickle vent in either grey, white or black.

47.5mm frame

Trickle vents on these windows are fitted to the frame with a 33mm frame extension at the head of the window above the first and last sash or centrally if this is one sash. These are an aluminium trickle vent in either grey, white or black.

Premium & Designer Windows

43mm slim frame

Trickle vents on these windows are fitted to a 38mm frame extension at the head of the window above the first and last sash or centrally if this is one sash. These are an aluminium trickle vent in either white or black. 

55mm frame

Trickle vents on these windows are fitted to the frame with a 20mm frame extension at the head of the window above the first and last sashor centrally if this is one sash. These are an aluminium trickle vent in either white or black

PVC Tilt & Turn Windows

Trickle vents on these windows are fitted to each opening sash. These are a PVC vent in either white, tan or rosewood.

Aluminium Tilt & Turn Windows

Trickle vents on these windows are fitted to the frame. These are an aluminium trickle vent in either white or black.

Yes
+£6.00
No
+£0.00
Handle Colour Options
White
+£0.00
Black
+£0.00
Grey
+£7.00
Bright Chrome
+£10.00
Gold
+£10.00
Brushed Steel
+£10.00
Satin Silver
+£15.00

Glass Options

Glass Specification
Opt 2
+£0.00
Opt 3
+£30.00
Obscure Glass
None
+£0.00
Satin
+£0.00
Arctic
+£0.00
Autumn
+£0.00
Chantilly
+£0.00
Charcoal Sticks
+£0.00
Contora
+£0.00
Cotswold
+£0.00
Digital
+£0.00
Everglade
+£0.00
Flemish
+£0.00
Florielle
+£0.00
Mayflower
+£0.00
Minster
+£0.00
Oak
+£0.00
Pelerine
+£0.00
Reeded
+£0.00
Stippolyte
+£0.00
Sycamore
+£0.00
Taffeta
+£0.00
Warwick
+£0.00
Toughened Glass Options
Toughened Glass Options

Glass only requires to be toughened in critical locations as defined by part ‘N’ of the building regulations.

Part N (Glazing) deals primarily with safe breakage of glazing in critical locations, manifestation of glazing to prevent collision, safe cleaning of windows in commercial buildings, prevention of falling from windows and glazed openings.

The below diagram shows locations that require to be toughened (i.e. shaded areas). Click here if you require the detailed regulation part ‘N’

Yes
+£60.00
No
+£0.00
Integral Blinds - Type
Not Required
+£0.00
Manual Cord
+£0.00
Magnetic Slider
+£0.00
Integral Blinds - Colour
Integral Blinds - Colour

  • The image below is for illustration only. Colour swatches are available at £5 inc p&p.

Not Required
+£0.00
Metallic Silver
+£225.00
White
+£225.00
Pale Silver
+£225.00
Cream
+£225.00
Light Grey
+£225.00
Yellow
+£225.00
Fawn
+£225.00
Green
+£225.00
Blue
+£225.00
Dark Grey
+£225.00
Choose Options

Chosen options

Ask a question
Enter your details to view your quote
Get your quote
Discount applied at checkout

Can we help you further?

Still looking for product advise or spec information, please see our FAQs

Full FAQ listings
FAQs callout

Supplying unbeatable doors and windows for domestic builds

Get in touch today to find out more

Not ready yet? Just checking out your options?

We get it, it's a big decision and you're right to do your homework!
Leave your email address below and we will honour any sale or promotion we currently have running for the next 6 weeks.